拖尾渲染器说明

狂风大尉

The Trail Renderer is used to make trails behind objects in the scene as they move about.
拖尾渲染器（Trail Renderer）用于制作跟在场景中的物体后面的拖尾效果来代表它们在到处移动。



The Trail Renderer Inspector 拖尾渲染器检视面板



Details 细节
The Trail Renderer is great for a trail behind a projectile, or contrails from the tip of a plane's wings. It is good when trying to add a general feeling of speed.
拖尾渲染器（Trail Renderer）用于炮弹后面的拖尾，或是飞机机翼尖端产生的凝结尾的效果非常棒。当尝试添加一个速度的通用感觉时也很好。
When using a Trail Renderer, no other renderers on the GameObject are used. It is best to create an empty GameObject, and attach a Trail Renderer as the only renderer. You can then parent the Trail Renderer to whatever object you would like it to follow.
当使用一个拖尾渲染器（Trail Renderer）时，不能在游戏物体（GameObject）上使用其他的渲染器。最好是创建一个空的游戏物体（GameObject），并附加一个拖尾渲染器作为唯一的渲染器。然后你可以将你想要跟随的物体设置为拖尾渲染器的父物体。

Materials 材质
Trail Renderers should use a material that has a Particle Shader. The Texture used for the Material should be of square dimensions (e.g. 256x256 or 512x512).
拖尾渲染器（Trail Renderer）将使用一个包含粒子着色器（Paricle Shader）的材质。材质使用的贴图必需是平方尺寸（例如：256×256或512×512）。

Trail Width 拖尾宽度
By setting the Trail's Start and End Width, along with the Time property, you can tune the way it is displayed and behaves. For example, you could create the wake behind a boat by setting the Start Width to 1, and the End Width to 2. These values would probably need to be fine-tuned for your game.
通过设置拖尾的开始和结束宽度（Width），配合时间（Time）属性，你可以调节它显示和表现的方式。例如，你可以创建一个船后面的浪花（wake? Or wave?），设置开始宽度为1，结束宽度为2。这些值大概需要为你的游戏进行适当的调节。

Trail Colors 拖尾颜色
You can cycle your trail through 5 different color/opacity combinations. Using colors could make a bright green plasma trail gradually dim down to a dull grey dissipation, or cycle through the other colors of the rainbow. If you don't want to change the color, it can be very effective to change only the opacity of each color to make your trail fade in and out at the head and/or tail.
你可以通过5种不同的颜色/透明度组合循环变化你的拖尾。使用颜色能使一个亮绿色的等离子体拖尾渐渐变暗到一个灰色耗散结构，或是使彩虹循环变为其他颜色。如果你不想改变颜色，它可以非常有效的仅仅改变每一个颜色的透明度来使你的拖尾在头部和/或尾部之间进行渐变。

Min Vertex Distance 最小顶点距离
The Min Vertex Distance value determines how far the object that contains the trail must travel before a segment of the trail is solidified. Low values like 0.1 will create trail segments more often, creating smoother trails. Higher values like 1.5 will create segments that are more jagged in appearance. There is a slight performance trade off when using lower values/smoother trails, so try to use the largest possible value to achieve the effect you are trying to create.
最小顶点距离（Min Vertex Distance）决定了包含拖尾的物体在一个拖尾的段实体化之前必需经过的距离。较小的值如0.1将更频繁的创建拖尾段，生成更平滑的拖尾。较大的值如1.5将创建显示有更多锯齿的段。当使用较低的值/更平滑的拖尾时有一点点性能损失，所以应该尝试使用尽可能大的值来达到你想要创建的效果。
Hints 提示

    Use Particle Materials with the Trail Renderer.

    在拖尾渲染器（TrailRender）中使用粒子材质（Particle Material）。
    Trail Renderers must be laid out over a sequence of frames, they can't appear instantaneously.

    拖尾渲染器（TrailRender）必需在一些连续帧之后显现，它不能突然出现。
    Trail Renderers rotate to display the face toward the camera, similar to other Particle Systems.

    拖尾渲染器（TrailRender）将旋转为面向摄像机显示，就像其他的粒子系统（Particle Systems）。

HIDEOKOJIMA

Thanks for this!!!

hyui

Good to know!

hariboot

很好的学习资料，谢谢

Kadina

thank you for sharing

wa5145416

挺厉害的。。

gxf5168

正好需要这个效果，受教了